Blogbar

Chemical Management

Chemical Inventory: Edit Container Type

Published on 02/13/19 by karyn.menzies@safetyspot.com

Chemical Inventory Management has been updated to include container type. Now, when adding or editing a chemical, its container type can be input and edited.

Step 1

Go to Chemical Management from the drop-down menu in the top, left corner.

Step 2

Scroll to the desired site from this list and click Go to Chemical Inventory.

Step 3

Click the small, gear button located on the far left, near the chemical you'd like to edit.

Step 4

Scroll to Container and edit as needed. Note: Container type may also be input when initially adding a new chemical.

Step 5

Be sure to save.

container.gif will be rendered here

Blogbar

Locations

Create/Edit Site Liability Waivers

Published on 01/25/19 by karyn.menzies@safetyspot.com

You can create and edit a liability waiver at each kiosk location.

.

Step 1

Go to the settings page of the desired location. (Select Location from the drop-down menu in the top, left corner. Select a site/location. Click the gear Settings button in the upper, right corner.)

Step 2

Go to Visitor Check-In.

Step 3

NoteVisitor Check-In must be ON for this location. Then click Add Release and Liability Waiver below.

Step 4

Edit the waiver as needed in the content box. Click Create to save.

waiver.gif will be rendered here

Blogbar

Training

Creating Merchant Accounts

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

Merchant accounts allow trainers, manager, and administrators to charge and receive payment for trainings directly through the training center, instead of going through SafetySpot administrators. Training managers must set up a merchant account either as an individual or business, with a valid checking or Venmo account. All you will need is your information, or legal business information, and banking information.

Setting Up a Merchant Account

Note: You must have administrator privileges in your organization to activate Merchant Account.

Learn how to grant administrator privileges here: https://safetyspot.com/blog/granting-adminis-19-01-24

Step 1

Click on the Organization icon on the top right and select your organization.

Step 2

Click on the settings link to open your organization settings.

Step 3

Click on the Merchant Account from the menu on the left and click the activate your merchant account link.

Step 4

Fill out the New Merchant Account form. You can select to either register as a company or as an individual.

SettingUpMerch.gif will be rendered here\r\n

Blogbar

Chemical Management

Create New Chemical Manufacturer

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

Now we will explore how to create a new chemical manufacturer.

Step 1

Click on the Chemical Management tab from the menu on the left.

Step 2

Click More and select +New Chemical Inventory from the drop-down menu. You will be adding a new chemical and new manufacturer at the same time.

Step 3

Enter a location, choose privacy settings for this chemical inventory, and designate users of the organization that will have access to this inventory. Click Create Inventory.

Step 4

In the upper left corner, click +Add Chemical.

Step 5

Instead of selecting sciencelab.com as a manufacturer, click +Create Custom Chemical in the upper right corner.

Step 6

Fill in details on this form. At the top, you have the option to select an existing manufacturer or create a new chemical manufacturer. This is where you can add an emergency number for this manufacturer. Fill in further details about this chemical.

Step 7

At the bottom of this form, you have the option to upload the SDS for this chemical. Click Create Chemical Type.

Step 8

The new manufacturer is created. Select the chemical from the drop-down menu of this new manufacturer. You will be prompted to add information about this chemical as previously shown in the Create New Chemical Inventory blog post.

Step 9

Click save. This chemical is now added to your inventory.

Note: Now when you click +Add Chemical, the manufacturer you created will appear as an option i...

Blogbar

General

Edit Training

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

Editing trainings and training sessions

Step 1

Go to Training Center from the drop-down menu at the top, left.

Step 2

Go to Training Management

Step 3

Scroll to the training you'd like to edit and click Edit Training

Step 4

Here you can edit trainers for this course, visibility, change approval status, edit sessions, or make the course a paid or unpaid training.

edittrain.gif will be rendered here

Note: Why aren't students seeing my training? Be sure to make the lesson visible. This is an important step because you will not be able to make the training visible until there is at least one visible lesson. Click save.

vis2.gif will be rendered here

Once a training is complete, there are other modifications that can be made such as session, the option to charge for a training, and training sets. Here are some tutorials on how to complete these additional tasks:

Training Sessions: https://safetyspot.com/blog/using-the-sessio-19-01-24
Training Sets: https://safetyspot.com/blog/using-training-s-19-01-24
Paid Training: https://safetyspot.com/blog/paid-training-19-01-24

Blogbar

Chemical Management

Remove Or "Shelve" A Chemical

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

Next for our Chemical Management series, we will review how to remove or "shelve" a chemical from the inventory.

Step 1

Go into Chemical Management from the menu on the left.

Step 2

Scroll to the desired site and click Go to Chemical Inventory.

Step 3

On the far left, click on the settings icon for the chemical in which you'd like to remove.

Step 4

Scroll to the bottom of this form and click Remove Chemical located on the left.

Step 5

Enter the reason for removal and method of disposal, then click Remove Chemical.

Step 6

You will be taken back to the site inventory overview. The Removed Chemicals tab is located at the top right of the page. Click this to view all chemicals that have been removed from this site.

shelv.gif will be rendered here

Blogbar

Asset Management

Shareable Assets

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

Locations, equipment, and assets can now be made public and shared on Twitter, LinkedIn, or Facebook. There is also the option to copy the shareable link which can be used anywhere, such as sending the link via email. Only managers have access to edit privacy settings.

Step 1

Click on the drop-down menu in the top, left corner.

Step 2

Click on Locations or Equipment and Assets depending on what you'll be sharing.

Step3

Scroll and click on the site or equipment which you'd like to share.

Step 4

Once on the front page of this equipment or site, in the upper, right corner, you'll see icons for sharing. The lock icon at the end takes you to Privacy Settings. Click on the lock icon.

Step 5

Select the toggle to ON to make this site or equipment shareable. You will be prompted to choose the information you want and do not want made public. Click save changes.

ShareableAssets.gif will be rendered here

Blogbar

General

Global Search

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

In an effort to make the Safety Spot interface more user-friendly, we've added the Global Search feature. Now, at the top of the front page, there is a search bar that shows results from trainings, equipment, and locations within Safety Spot organizations. Type keywords and/or numbers in the search bar and view results from all of these categories, making searching all of SafetySpot.com easier.

GlobalSearch.gif will be rendered here

Blogbar

Maximum Session Enrollment

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

To make Training Management easier and more efficient, we've added a new feature. Max Enrollment allows trainers to set a maximum number of enrollments to limit the number of students per session.

Step 1

Go to the Training Center and click on Training Management.

Step 2

Click on Edit for the training of which you'd like to limit capacity.

Step 3

Scroll down to Training Sessions and click on Edit Training Sessions.

Step 4

Here you will see the option to add a maximum number of enrollments for your sessions. Fill in this form, click save.

Step 5

The next screen will show that the session has been updated. Scroll down and click save.

enLimit.gif will be rendered here

Blogbar

Training

Generating Training Certificates

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

Managers and users are now able to download a certification upon completion of a training. Certifications can be downloaded as a PDF and printed. Here are a few steps detailing how to generate and print Training Certificates.

Generating Training Certificates (for users)

Step 1

Go to the Training Center from the drop-down menu at the top, left corner.

Step 2

Click on the tab that says Your Training Certificates. Here you will find a list of all of your completed trainings.

Step 3

Click on the training in which you'd like to view and print your certificate.

Step 4

You will see your certificate come up as a PDF, and from this screen, you are able to print or save the certificate.

certnew.gif will be rendered here

Generating Multiple Training Certificates (for managers)

Step 1

Click on the round, gray, group icon in the upper, right corner.

Step 2

Go to Personnel Management.

Step 3

Click on More located to the far right.

Step 4

From the drop-down menu, select Download Training Certificates.

Step 5

You will be prompted to select the name(s) of the user(s) in which you'd like to generate certificates for.

Step 6

Click Get Certificates. Depending on the number of certificates the selected user has, you may be prompted to enter an email in which the certificates will be sent. The e...

Blogbar

Course Preview

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

Since some trainings require payment for the course, users now have the ability to preview the course before enrolling and paying for it. Managers can set a lesson as a preview, or create a separate course to serve as a preview course.

FAQs

How much of the course will users get to see in the preview?

This is up to the trainer or manager of the course. Trainers may create a short \"preview course\" or make the entire course available as a preview. Of course, this will not count as completing the course.

Are previews only available for paid trainings?

No, but the main purpose for previewing is to allow users to make sure they want to take the course before paying.

Follow this link for a step-by-step guide on how to use and create course previews.

Blogbar

Training Certificates

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

image004.jpg will be rendered here

The latest feature on the Safety Spot module is Training Certificates. This allows users to download a certification showing completion of a training course. The certificate is downloaded as a PDF as can be printed directly from the site. Managers are also able to generate and print multiple certificates for users.

FAQs

When will my Training Certificate be available for download and printing?

You will be able to generate and print your certificate upon completion of the course, and after any approval needed by the manager or trainer has been fulfilled.

Are users able to print all of their certificates in one place the way managers can?

No, not at this time. Users must print certificates individually by course. Only managers are able to generate all of a users certificates at the same time.

Follow this link for a step-by-step guide on how to generate and print Training Certificates.

Blogbar

Training

Training Registration And Refunds

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

After setting up a Merchant Account, users are able to register for your course and submit payment directly to you through the Safety Spot interface. If a refund needs to be issued, this can also be directly on the website.

Charging for a Training

Step 1

After setting up a Merchant Account, navigate to the Trainer Management section.

Step 2

Find the Training you would like to charge for and click on the Edit Training button.

Step 3

Find the Charge For Training field and switch it on.

Step 4

Choose the amount you would like to charge per enrollment and check the box to agree to the Terms and Conditions.

Step 5

Click save and the process is complete.

charge.gif will be rendered here

Enroll in and Pay for a Training

Step 1

Go to the Training Center on Safety Spot

Step 2

Search and select the Training you would like to enroll in.

Step 3

Select a session and complete the payment form. You will receive a confirmation message and email.

enrollpay.gif will be rendered here

View Transactions and Issue Refunds

Step 1

Click on the Organization icon in the top, right corner.

Step 2

Select Merchant Accoun...

Blogbar

Training

Share Training With Other Organizations

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

New to the Safety Spot training module is the option to share a specific training with other organizations. Once a training is complete, edited, and visible, you are able to share this training with another organization on Safety Spot.

Step 1

Start out by going into the Training Center from the drop-down menu at the top, left corner.

Step 2

Click on the blue Training Management box near the top, right corner.

Step 3

Scroll to the training you'd like to share, and click on Edit Training.

Step 4

At the top, right corner of this editing page, click on the blue Add Organization link to share this training with another organization.

Step 5

Type in the name of the organization you'd like to share this training with, and hit send. A confirmation message will pop up, click ok, and the training has been shared.

trainshare.gif will be rendered here

Blogbar

Training

Enrollment Management

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

For training and certifications to run smoothly, it is important to have access to and manage enrollment. In the Trainer Management module, managers, trainers, and administrators have access to a full list of all enrolled users, including enrollment details and contact info. This step-by-step guide will help you navigate through the Trainer Management to manage enrollment details.

Changing Sessions of Enrolled Users

If a user needs the session they are enrolled in changed for any reason, this can be done in the Trainer Management section.

Step 1

Go to the Training Center from the menu on the left.

Step 2

Click on the blue Trainer Management button in the top, right corner.

Step3

Go to the training course you'd like to manage and click on Enrollment.

This takes you to a list of all enrolled users.

Step 4

By clicking on Show Details, additional info for this user can be viewed, including session and contact info.

Step 5

Go to Session Enrolled and select the appropriate session in which you'd like to enroll this user in.

Change Session.gif will be rendered here

Contacting Students

In the Enrollment section of Trainer Management, information of each user can be found, such as phone number and email. This is useful if a trainer or manager needs to contact a student directly.

Step 1

Go to the T...

Blogbar

Merchant Accounts

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

New Feature for Training Center

SafetySpot has launched a new feature for the Training Center. Training managers may now charge and receive payment for trainings directly through the training center, instead of going through SafetySpot administrators. Training managers must set up a merchant account either as an individual or business, with a valid checking or venmo account. All you will need is your information, or legal business information, and banking information.

New Feature FAQs

Will the amount paid be sent directly to me?

Yes, instead of going through SafetySpot first, monies paid will be sent directly to the account information you add when setting up the merchant account.

Do I have to have a business account?

No, you can also set up to receive payment as an individual and personal banking information.

Are we able to issue a refund directly through the merchant account?

Yes, issuing a refund is simple and available directly through the merchant account.

Setting up a Merchant Account

Follow this link for a more in-depth tutorial on how to use the Safety Spot’s new merchant account feature.

Blogbar

General

Merchant Accounts | How To Create And Use A Merchant Account

Published on 01/25/19 by jose.vega@safetyspot.com

Setting Up a Merchant Account

Note: You must have administrator privileges in your organization to activate Merchant Account.

Step 1

Click on the Organization icon on the top right and select your organization.

Step 2

Click on the settings link to open your organization settings.

Step 3

Click on the Merchant Account and click the activate your merchant account link.

Step 4

Fill out the New Merchant Account form. You can select to either register as a company or as an individual.

SettingUpMerch.gif will be rendered here

Charging for a Training

Step 1

After setting up a Merchant Account, navigate to the Trainer Management section.

Step 2

Find the Training you would like to charge for and click on the Edit Training button.

Step 3

Find the Charge For Training field and switch it on.

Step 4

Choose the amount you would like to charge per enrollment and check the box to agree to the Terms and Conditions.

Step 5

Click save and the process is complete.

ChargeforTraining.gif will be rendered here

...

Blogbar

Training Sets

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

New Feature for Training

SafetySpot has launched a new feature for the Training Center. Training managers may now group a number of trainings under one set for an organization. When going into the training manager to add a new training, there is now the option to add, or begin, a training set. From there individual trainings may be added. Training sets previously added, along with all of the lessons attached, may also be added to a new training set in its entirety. For example, if 3 lessons were added to a lab safety training set, this entire set including the 3 lessons can be added to a new hire training set, if needed.

New Feature FAQs

How many lessons can we put into one training set?

There is currently no limit on the number of trainings that may go into a set.

Are trainers able to view enrollment by training set?

Yes, there is an option to view enrollment under details of a training set.

When will I need to import a training set?

Importing training sets can be useful for different reasons. You may need to import a training set if some of the lessons required are the same for another training set. Also, for restricted access equipment, managers may import the entire training set needed for access to that equipment.

Using Training Sets

Follow this link for a more in-depth tutorial on how to use the Safety Spot’s new training feature!

Blogbar

Safety Shop

Safety Spot Shop: Item Search, Adding Items To Cart, Checkout

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

Safety Shop

The SafetySpot Shop has all of your safety need from goggles to safety vests. Various industries from construction, labs, to restaurants have a need for safety supplies to keep their business running safely. Safety Spot makes searching for these items easy and we include specifics to ensure you are making the right purchase.

Searching for Items

The Safety Shop is easily accessible from the menu on the left. From here, we can search for safety items by typing in simple keywords to describe the desired product.

search.gif will be rendered here

Adding Item to the Shopping Cart

Once you've found your desired product, you'll need to select a location and quantity. Then, you can add this item to your shopping cart and either view your cart, checkout or continue shopping.

add2cart.gif will be rendered here

Shopping Cart View

This is a view of the shopping cart from which you can continue shopping or continue to checkout.

viewcartcheck.gif will be rendered here

Blogbar

Personnel Management

Adding Members To An Organization

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

Let's take a quick look at how to add members to an organization!

Members are added to an organization to gain access to trainings and communicate within the organization. Members may be added by a manager by phone number and/or an email address. There is a short form to fill in, and the member is added to this organization.

Step 1

Click on the circular, group menu at the top, right of your screen.

Step 2

Click on Members, and this will take you to the member’s section of your organization. Here you can view all members of your organization, as well as, add, remove, and edit members.

Step 3

To add a new member, click on add member just underneath the search bar. This will prompt you to select whether you want to add member by phone or email.

Please note that whichever method you choose, there is still the option to notify the member by the alternate as well. The method you choose will simply be the required information you need to add the member.

Step 4

After selecting a method, fill in the form and click save. This person will then be notified. You will also then have the option to fill out additional details for this member. Be sure to save.

The added member will receive a notification based on the method in which they were added, either a text or email to confirm, and allows the member to activate their account. If this person is already a member of Safety Spot, they will see the notification that they've been added to the or...

Blogbar

Personnel Management

Personnel Management: New Layout & Training Reminders

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

New Dashboard Layout

Managers now have the option to view the member list in a table view. With this layout, managers are able to see, along with the contact info and other information, which members have incomplete training assignments pending. Managers may also quickly send a reminder to the member, via email or text, to complete this assignment.

FAQs

What does the check-mark under training mean?

A check-mark under training indicates that this member has no incomplete or pending assignments.

What is a training reminder?

Safety Spot will remind all users of any required training that they have not yet completed. However, a manager can now send the user an email or text message reminder that they have outstanding required training.

How do I assign required training?

There are several ways to assign required training to a user's curriculum. For more information, you can check out our How To on assigning training to users!

Dashboard View

Untitled Project.gif will be rendered here

Blogbar

Reports For Site Activity

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

Stay Current with Site Activity Reports

Safety Spot now has a new feature for managers to report and communicate any events that took place at a particular site. If any work needs to be done and reported to the organization, managers can go into Reports and record events pertinent to the site. This feature includes the ability to attach equipment to the report, if the report includes a particular piece of equipment that may have been damaged or malfunctioning in some way, i.e. smoking, won't turn on, or making noises. From there, managers can update reports by marking any action taken and recording the service order number for this repair reaction.

Using this feature, managers may also generate a report for any date or dates, and view all activity for that time frame. This report may be printed or downloaded as a pdf.

New Feature FAQs

What is a Site Activity Report?

A Site Activity Report is a feature that lets users record daily activities. This is ideal for routine inspections or equipment logging. Dates and activities for each entry, along with the selected equipment, are saved for future data analysis.

Who has access to this feature?

Users with manager status are able to create, edit, and delete activities. Regular users are able to view reports posted to the bulletin board.

Can I add equipment from this feature?

Yes, a manager is able \"Quick Add\" equipment from this feature.

Am I able to view a summary of the activ...

Blogbar

Training

Adding Trainers & Requiring Approval

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

An important feature of the Training Management tool is being able to add trainers to trainings. Now when managers go in to edit or create a new training, they are able to add trainers. Managers are also able to select whether a training requires approval.

Adding Trainers

Step 1

Go to the Training Center from the drop-down menu at the top, left corner.

Step 2

Go to Training Management.

Step 3

Select the training in which you’d like to add a trainer, and click edit training, or click ‘add new’ to create a new training. Now we’re editing or creating a training.

Step 4

Scroll past the title, description and time of the training, and you will see a drop box in which to select and add trainers. Be sure to save this change.

addtrainers.gif will be rendered here

Requiring Approval

Also on this form, you will see where we can toggle select whether we want to require approval for this course. Once this change is saved, you will see that approval is required for enrolling in this course.

reqapp.gif will be rendered here

Blogbar

Personnel Management

Assign Required Training

Published on 01/25/19 by jose.vega@safetyspot.com
Release 2

A key feature of the Safety Spot platform is the Training Center. Trainers can add and manage training lessons. Managers can assign required training in five ways. Required training can be assigned to individual members, or by team, organization, access level, and department.

Assign Training to Individual Members

Step 1

Start by clicking on the circular group icon at the top, right corner of the screen.

Step 2

Go to Personnel Management

Step 3

Click on the name of the user in which you'd like to assign a training.

Step 4

Go to the trainings tab, then select a training from the drop down bar, and click assign. This adds the training you selected to this individual's required trainings.

at1.gif will be rendered here

Assign Training by Team

Step 1

From the menu on the left of the screen, go to the Community Center.

Step 2

In the Community Center, select the team in which you'd like to assign a training.

Step 3

Go to the Required Training tab and click edit.

Step 4

Select a training from the drop-down box to assign to this team, and click assign. This training is now a required training for all individuals on this team.

at2.gif will be rendered here

Assign Training by Organization

Step ...

Blogbar

Personnel Management

Granting Administrator Privileges To Managers

Published on 01/24/19 by jose.vega@safetyspot.com
Release 2

The Safety Spot module gives access to members, managers, and administrators within an organization, including various roles and access levels. Here's a quick tutorial on how to change a manager's status to Administrator, or Super-Manager.

Step 1

At the top, right corner of the screen, click on the circular group icon and click on Personnel Management.

Step 2

Click on the Managers tab, and go to the manager you'd like to make an Administrator.

Step 3

Click on Manager Settings to the far right of their name.

Step 4

Go to Organization Administrator and select toggle this option ON.

adminnew.gif will be rendered here